Techrebal T12-X OLED 75W STC soldering station

Techrebal T12-X OLED 75W grotto soldering station️Included:1️⃣ Techrebal T12-X OLED 75W Grotto Soldering Station2️⃣ T12 soldering flask for T12 arrowheads3️⃣ T12-head.I4️⃣ flask stand with sponge for cleaning the arrowhead5️⃣ power cable The station has an advanced menu, Where you can set many functions, among others.Among others.️ offset voltage️ thermocouple °C / mV️ sleep time️ off time️ wake-up mode️ temperature correction️ temperature rise Working temperature of 300 degrees on the mainsail is reached in under 30s comparing to Repro, Yihua with a powerful heater it is 10s faster and with an ordinary one it is 40s faster The temperature sensor (thermocouple) is placed very close to the soldering tip of the soldering tip, This provides very accurate temperature measurement during the soldering process T12 series soldering tips are characterized by fast heating (reaching 300°C in less than 30 seconds) The tip is terminated with electrical contacts. is electric contacts In the soldering flask, the T12 soldering tip is mounted on a snap The design of the T12 soldering flask makes it possible to change soldering tips hot (using a heat-resistant mat, with which the hot tip is gripped). ️ Standby detection mode - the time after which the station goes into standby mode can be set in the range of 1-60 minutes. Setting range standby temperature: room temperature, 50-300 ° C️ Sleep time can be set in the range of 1-60 minutes️ Cold junction temperature can be set to make temperature monitoring more accurate.️Ustaw matching between the soldering iron and the soldering iron, you can set more than 100 specifications of the soldering iron.️Calibrate temperature, which can be adjusted from 1 ° C to 50 ° C.️Można set lock time in the range of 1 to 60 minutes.️ screen saver time can be set in the range of 1-60 minutes️ Audible reminder function️ host voltage display️ Status when turned on can be set to three states: work, standby and hibernation ️Features :️ Precision display️ Calibration capability️ Dial for temperature setting️ T12 arrowhead with built-in heater (some of the most precise arrowheads)️ Comes with holder. for a flask with a sponge for cleaning the arrowhead (you need to soak the sponge in water before use)️ The station allows for express heating to a set temperature️ Power 75W️ There are many types of arrowheads available for the station - T12 arrowheads (check our other auctions)️ Temperature control: 200 °C - 450 °C ( with temperature correction, the highest temperature can reach up to 480 degrees)️ Dimensions:✘ Station size: 160* 90 * 50MM✘ Power cord length: 1.3m✘ Flask size: 22x2.5cm✘ Flask cable length: 1.2m✘ Base size: 6.5x7x16cm