Table edgebanding machine STILER EB100 + 1kg glue

STILER EB100 STATIONARY VOELING MACHINE The latest model of stationary table top veneer machine by STILER. Ideally suitable for veneering table tops up to 60 mm in height and automatic milling of table tops up to 45 mm in height. The veneer machine is equipped with automatic application of glue on the table top and veneer. In addition, the machine has two milling machines for milling the top and bottom edges of the tabletop. The machine also has two pneumatic veneer cutters (a compressor must be connected to power them). The EB100 model has also been equipped with the option of polishing the milled edge. The veneer machines have been equipped with a main switch and protection against restarting the machine at the loss and return of power. Technical data: Total power demand: 3.0 kW Power supply: 230V Wrapping height: 7 - 60 mm Milling height: 7 - 45 mm Tape thickness: 0.3-3 mm Heat-up speed: 5 - 10 minutes Wrapping speed: 0-6 m/min Gluing tank capacity: 1000 ml Cutter stem: 1/4" Dimensions: 855 x 500 x 430 mm Weight: 50 kg Included: Complete machine 2 cutters with bearing 1 kg of glue The machine is equipped with automatic veneer retrieval and automatic cutting to the appropriate length of the tabletop. The rollers retrieving the veneer turn on when the glue reaches the appropriate temperature. On the control panel there is: main switch milling machine switch electronic glue temperature indicator knob from smooth speed of veneer feeding knob from speed of edge polishing There are two pneumatic veneer cutters in the veneer machine for their power supply, which requires a compressor of about 8 BAR. The cutters are switched on by foot switches and a limit switch when feeding the tabletop. The pressure rollers set obliquely help to guide the tabletop evenly and prevent the tabletop from reversing. The rollers have adjustable pressure. The edge milling machines mill both the top and bottom edges of the tabletop. The set includes 2 milling cutters with bearings A great convenience is an additional arm for veneer. The disc is mounted on a bearing. The machine also has an option for veneering tabletops of irregular shape. For such veneering it is necessary to move the glue feeding head to the lateral position. The veneer machine is equipped with a blower to clean the work area during milling. The work surface has slides and support rollers for easier movement of the material during operation. The support rollers have an option to extend which allows you to veneer larger sizes. Reproduction videos