Single-stage vertical oxygen cylinder regulator ROIII-200 POMET

Single-stage vertical oxygen cylinder regulator ROIII-200 POMET. . Description. Reducers are designed to reduce the inlet pressure of gases drawn from cylinders to the required outlet pressure and keep it constant, regardless of changes in cylinder pressure (within tolerance). These are single-stage countercurrent regulators (fig1) and their characteristic feature is the vertical position of the setting knob. The regulators are equipped with a special metal sinter filter, which is part of the reducing valve. It is attached to cylinder valves by a nut 6 or by a yoke 2 in acetylene reducers. The inlet pressure p1 is indicated by pressure gauge 3, and the outlet pressure p2 by pressure gauge4. The flow of gas from the regulator is through the spigot 5 with a hose end. It is permissible to use an additional shut-off valve with stub 5. Inside the body there is a reducing valve assembly and a movable piston instead of a classic diaphragm, which has a beneficial effect on the stability of the outlet pressure. Inside the cover 6 there is a setting spring and a safety valve inaccessible to the operator. The pressure gauges indicate the type of gas the regulator is designed for and the maximum allowable values in bar. A feature that allows full identification of the reducer is marked on the body of the reducer - plate No. 1. Reducers can be used to supply typical welding torches and for other purposes, if the requirements are consistent with the technical data of the reducer.- arrangement: vertical . - gas type: oxygen . - gas inlet pressure: 200 bar - gas outlet pressure: 10 bar - throughput: 30 m3/h - inlet thread: G3/4 - outlet thread: G1/4 . POM 250.00.00