STEHLE circular saw KDF - POSITIVE 350 x 3.5 / 2.5 x 30 Z 72

The saw with the canopy-flat tooth (DA-F DU) is the ideal solution for cutting wood-based panels. The blade will cope with both raw and laminated boards. Slightly worse but also well KDF positive performs when cutting solid wood. It will perform well both as a vertical panel saw and as a table saw and panel saw. Cutting quality, depending on the dimensions and number of teeth, ranges from coarse to very good. In brief. Machine/Application: Vertical panel saws For cutting to size in raw and laminated panels Design: Noise and vibration dampening cuts Additional expansion slots Toothing: canopy-straight teeth with curved attack surface "DA-F DU" Blade material: HW TC06 Advantages: Very quiet and smooth operation due to vibration and noise dampening cuts, as well as special expansion slots Good bottom edge quality even without an undercutting saw Ideal cutting quality QUALITY OF DESIGN. Made to the highest quality standard offered by Stehle 3-0-1, this saw is used for stationary machines. It will prove itself especially in industrial applications where tools are subjected to the highest loads. The laser-cut body and properly selected carbide will ensure the highest service life and high precision machining. Like saws made in the 2-0-6 quality standard, the design of the blade silences the operation of the saw. The brewing and quality control is done by machine and then, each piece is checked by a human which guarantees the highest quality saws. Regardless of the quality standard in which the saw is made, the coats of all are produced from hardened steel, which undergoes the hardening process already at the raw material supplier. Putting this process in the hands of professionaires guarantees the highest quality of the semi-finished product. Stehle is a guarantee of continuous operation and good cutting quality. QUALITY OF CUTTING MATERIAL. TC06 - tungsten carbide best suited and used in saws for cutting wood-based panels, composite materials, but also successfully used in processing solid wood or building materials. This carbide gradation is a compromise between hardness and flexibility.