STEHLE circular saw KKM 120 x 3.2 / 2.5 x 40 Z 36

An alternate tooth (WS) saw will work best for cutting wood-based materials. It will also cut wood and plastics well. This model is intended for veneering machines and CNC machines. Depending on the number of teeth and diameter, it will give a rough to very good cutting quality. Most dimensions will give good cutting quality. Depending on the dimensions, the saw is compatible with Homag BAZ, Biesse Akron 600/800, Flex 5, Weeke and other machines. When purchasing, we recommend checking the requirements in the specifications of the machine in question. In brief. Machine/Application: Veneer trimmers For trimming veneer from plastic, veneer and solid wood Design: Special NoNoise interdental space geometry Positive rake angle With or without shear angle Drive holes with recess Serration: alternate "WS" teeth Blade material: HW TC06 Advantages: Very low noise level Noise reduction of approximately 6 dB(A) when idle Additional information: Δ = no cavity Direction of rotation in accordance with DIN-EN 50144 QUALITY OF CONSTRUCTION. Saw made to the highest quality standard offered by Stehle 3-0-1. Used for stationary machines. It will prove itself especially in industrial applications where tools are subjected to the highest loads. The laser-cut body and properly selected carbide will ensure the highest service life and high precision machining. Like saws made in the 2-0-6 quality standard, the design of the blade silences the operation of the saw. The brewing and quality control is done by machine and then, each piece is checked by a human which guarantees the highest quality saws. Regardless of the quality standard in which the saw is made, the coats of all are produced from hardened steel, which undergoes the hardening process already at the raw material supplier. Putting this process in the hands of professionaires guarantees the highest quality of the semi-finished product. Stehle is a guarantee of continuous operation and good cutting quality. QUALITY OF CUTTING MATERIAL. TC06 - tungsten carbide best suited and used in saws for cutting wood-based panels, composite materials, but also successfully used in processing solid wood or building materials. This carbide gradation is a compromise between hardness and flexibility.